what to write in a thesis abstract template

McCombes, S. (2022, November 11). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved March 2, 2023, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, what is your plagiarism score.

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

“The growing economic resemblance of spouses has contributed to rising inequality by increasing the number of couples in which there are two high- or two low-earning partners. [Annotation for the previous sentence: The first sentence introduces the topic under study (the “economic resemblance of spouses”). This sentence also implies the question underlying this research study: what are the various causes—and the interrelationships among them—for this trend?] The dominant explanation for this trend is increased assortative mating. Previous research has primarily relied on cross-sectional data and thus has been unable to disentangle changes in assortative mating from changes in the division of spouses’ paid labor—a potentially key mechanism given the dramatic rise in wives’ labor supply. [Annotation for the previous two sentences: These next two sentences explain what previous research has demonstrated. By pointing out the limitations in the methods that were used in previous studies, they also provide a rationale for new research.] We use data from the Panel Study of Income Dynamics (PSID) to decompose the increase in the correlation between spouses’ earnings and its contribution to inequality between 1970 and 2013 into parts due to (a) changes in assortative mating, and (b) changes in the division of paid labor. [Annotation for the previous sentence: The data, research and analytical methods used in this new study.] Contrary to what has often been assumed, the rise of economic homogamy and its contribution to inequality is largely attributable to changes in the division of paid labor rather than changes in sorting on earnings or earnings potential. Our findings indicate that the rise of economic homogamy cannot be explained by hypotheses centered on meeting and matching opportunities, and they show where in this process inequality is generated and where it is not.” (p. 985) [Annotation for the previous two sentences: The major findings from and implications and significance of this study.]

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

“From the mid-1970s through the mid-1980s, a network of young urban migrant men created an underground pulp fiction publishing industry in the city of Dar es Salaam. [Annotation for the previous sentence: The first sentence introduces the context for this research and announces the topic under study.] As texts that were produced in the underground economy of a city whose trajectory was increasingly charted outside of formalized planning and investment, these novellas reveal more than their narrative content alone. These texts were active components in the urban social worlds of the young men who produced them. They reveal a mode of urbanism otherwise obscured by narratives of decolonization, in which urban belonging was constituted less by national citizenship than by the construction of social networks, economic connections, and the crafting of reputations. This article argues that pulp fiction novellas of socialist era Dar es Salaam are artifacts of emergent forms of male sociability and mobility. In printing fictional stories about urban life on pilfered paper and ink, and distributing their texts through informal channels, these writers not only described urban communities, reputations, and networks, but also actually created them.” (p. 210) [Annotation for the previous sentences: The remaining sentences in this abstract interweave other essential information for an abstract for this article. The implied research questions: What do these texts mean? What is their historical and cultural significance, produced at this time, in this location, by these authors? The argument and the significance of this analysis in microcosm: these texts “reveal a mode or urbanism otherwise obscured . . .”; and “This article argues that pulp fiction novellas. . . .” This section also implies what previous historical research has obscured. And through the details in its argumentative claims, this section of the abstract implies the kinds of methods the author has used to interpret the novellas and the concepts under study (e.g., male sociability and mobility, urban communities, reputations, network. . . ).]

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

“Several studies have reported reprogramming of fibroblasts into induced cardiomyocytes; however, reprogramming into proliferative induced cardiac progenitor cells (iCPCs) remains to be accomplished. [Annotation for the previous sentence: The first sentence announces the topic under study, summarizes what’s already known or been accomplished in previous research, and signals the rationale and goals are for the new research and the problem that the new research solves: How can researchers reprogram fibroblasts into iCPCs?] Here we report that a combination of 11 or 5 cardiac factors along with canonical Wnt and JAK/STAT signaling reprogrammed adult mouse cardiac, lung, and tail tip fibroblasts into iCPCs. The iCPCs were cardiac mesoderm-restricted progenitors that could be expanded extensively while maintaining multipo-tency to differentiate into cardiomyocytes, smooth muscle cells, and endothelial cells in vitro. Moreover, iCPCs injected into the cardiac crescent of mouse embryos differentiated into cardiomyocytes. iCPCs transplanted into the post-myocardial infarction mouse heart improved survival and differentiated into cardiomyocytes, smooth muscle cells, and endothelial cells. [Annotation for the previous four sentences: The methods the researchers developed to achieve their goal and a description of the results.] Lineage reprogramming of adult somatic cells into iCPCs provides a scalable cell source for drug discovery, disease modeling, and cardiac regenerative therapy.” (p. 354) [Annotation for the previous sentence: The significance or implications—for drug discovery, disease modeling, and therapy—of this reprogramming of adult somatic cells into iCPCs.]

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

what to write in a thesis abstract template

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By: Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA) | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

We’ll explain each of these in more detail a little later in this post. Buckle up.

A good abstract should detail the purpose, the methodology, the key findings and the limitations of the research study.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to inform potential readers of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider.

The second purpose of the abstract is to inform search engines and dissertation databases as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users.

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside.

The abstract serves to inform both potential readers (people) and search engine bots of the contents of your research.

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

Even if you have no intentions to publish your work, you still need to provide an impactful abstract for your markers.

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order. Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions. In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research.

In this part of your abstract, you should address the following questions:

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

The purpose of the implications section is to highlight the "so what?" of your research. In other words, to highlight its value.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert.

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the what , why , how , and so what of your research in your abstract:

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst… there’s more (for free)

This post is part of our research writing mini-course, which covers everything you need to get started with your dissertation, thesis or research project.

You Might Also Like:

The Dissertation Abstract: 5 Costly Mistakes To Avoid

10 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

Thanks for this nice and helping document.

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Print Friendly

We use cookies and similar technologies to improve your website experience and help us understand how you use our website. By continuing to use this website, you consent to the usage of cookies. Learn more about our Privacy Statement and Cookie Policy .

Hours and Locations

Writing an Abstract

What is an abstract.

An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.

According to Carole Slade, an abstract is “a concise summary of the entire paper.”

The function of an abstract is to describe, not to evaluate or defend, the paper.

The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

The abstract should contain the most important key words referring to method and content: these facilitate access to the abstract by computer search and enable a reader to decide whether to read the entire dissertation.

Note: Your abstract should read like an overview of your paper, not a proposal for what you intended to study or accomplish. Avoid beginning your sentences with phrases like, “This essay will examine...” or “In this research paper I will attempt to prove...”

(The examples above are taken from Form and Style (10th ed.), by Carole Slade; The Scott, Foresman Handbook for Writers (5th ed.); and the Publication Manual of the American Psychological Association (5th ed.).)

Note: The following are specifications for an abstract in APA style, used in the social sciences, such as psychology or anthropology. If you are in another discipline, check with your professor about the format for the abstract.

Writing an Abstract for an IMRaD Paper

Many papers in the social sciences, natural sciences, and engineering sciences follow IMRaD structure: their main sections are entitled Introduction, Methods, Results, and Discussion. People use the abstract to decide whether to read the rest of the paper, so the abstract for such a paper is important.

Because the abstract provides the highlights of the paper, you should draft your abstract after you have written a full draft of the paper. Doing so, you can summarize what you’ve already written in the paper as you compose the abstract.

Typically, an abstract for an IMRaD paper or presentation is one or two paragraphs long (120 – 500 words). Abstracts usually spend

25% of their space on the purpose and importance of the research (Introduction)

25% of their space on what you did (Methods)

35% of their space on what you found (Results)

15% of their space on the implications of the research

Try to avoid these common problems in IMRaD abstracts:

1. The abstract provides a statement of what the paper will ask or explore rather than what it found:

X This report examines the causes of oversleeping. (What did it find out about these causes?) √ Individuals oversleep because they go to bed too late, forget to set their alarms, and keep their rooms dark.

2. The abstract provides general categories rather than specific details in the findings:

X The study draws conclusions about which variables are most important in choosing a movie theater. (What, specifically, are these variables?)

√ The study concludes that the most important variables in choosing a movie theater are comfortable seats and high-quality popcorn.

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

Another way to think of this structure is:

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Thesis Abstract: Writing Techniques and Guidelines

Thesis Abstract Writing Guidelines

Tips on how to write dissertation abstract.

Three key elements of a Thesis Abstract

Results and Conclusion

Thesis abstract process of writing, dissertation / thesis abstract examples, undergraduate level thesis abstract example, graduate level thesis abstract example.

Thesis abstract is an essential part of the dissertation paper. It is a summary of a complete work. It gives readers a chance to discover the key points of your dissertation, its research chapter, methodology and results part. Writing a proper abstract is important. Students use various techniques and guidelines to perform a perfect thesis abstract. Proper structure and of thesis dissertation is crucial. It should answer all the study’s questions and be written to identify a major element of a dissertation or thesis paper. Also check other thesis writing tips that will lead you to success or contact our thesis writing service to get professional help with Ph.D. work.

Thesis abstract (same as dissertation abstract ) answers the main questions of an entire paper. This short summary is a single page of text. It needs to show key methods used in a work, problems analyzed and gathered outcomes of a complex research work. This kind of academic assignment requires profound knowledge. People, who read abstracts, prefer those summaries that remain short, but very informative, with presented limitations in research and clear study results.

How to write the abstract of a thesis ? Thesis abstract is a small version of your dissertation or thesis . This small description ensures a better understanding of an entire paper, discovers the present condition of analyzed problems, distinguishes main objectives and determines existing expectations. A profound analysis of a major question is requested. Abstract needs to be less than five percent of the dissertation. Students write thesis abstracts of a proper length, get information for the summary using their own personal background information, knowledge and analyses’ fallouts.

Thesis abstract includes main analyzed objectives, compound research questions , problem statements, detailed dissertation methodology , and conclusions. Abstract needs to include source references and acronyms. It allows describing the top point of a dissertation paper providing a good understanding of the studied subjects and discovering numerous outcomes. Key theories and hypotheses are requested parts. They bring needed thesis abstract accurate form and allow saving time for this essential part flawless completion. Don't forget to check out thesis abstract examples provided by our professional thesis writers at the end of this article.

Writing a proper summary requires a good knowledge of an analyzed theme, valuable background information, improved writing and analytical skills. Advanced analytical skills allow performing its professional version. Key theories need to be a part of the short summary, showing main objectives of conducted analyses and research works. Proper thesis abstract format includes the following major elements:

The beginning of abstract needs to include general information. It draws readers’ attention, allows them discovering key research work’ objectives and outcomes of conducted studies when reading a single summary. However, don't confude an abstract with an executive summary format . Checking introduction, people get main information about conducted work. It is a kind of dissertation’s professional review. Writing a thesis abstract takes time for performing and must be performed after the entire dissertation paper is complete. It is clever to write it in such a way. It saves precious time and efforts used for editing in future.

Thesis abstract has a limit of words and describes the major purpose of research works, writer’s contribution to assigned problem-solving history. Many scientists have made great discoveries in their dissertations. Today, students face the same challenges. Numerous investigations are conducted with an aim to answer main questions of dissertation paper and provide appropriate indications. The level of papers’ difficulty depends on a scientist’s personal characteristics. They mostly include research skills and general knowledge.

Three key elements of a Thesis Abstract

Begin by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer? You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information.

After identifying the problem, state the objective of your research. Use verbs like investigate, test, analyze or evaluate to describe exactly what you set out to do. This part of the abstract can be written in the present or past simple tense, but should never refer to the future, as the research is already complete.

After - mention the research methods that you used to answer your question. This part should be a direct description of what you did in one or two sentences. It is usually written in the past simple tense as it refers to completed actions.

There is no need to evaluate validity or obstacles you might have encountered in this part - the goal is not to give an account of the methodology strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used. Mention whether you have used quantitative or qualitative methods .

Next - summarize the main research results. This part of the abstract can be in the present or past simple tense. Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, provide the main conclusion in thesis : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense. If your aim was to solve a practical problem, the conclusions might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

The literature review brings additional identifications and valuable sources of information. Writing down titles and authors of used works allows readers gaining additional sources of assigned problem discoveries and reaching data for calculations. Many analyses require accurate figures and numbers. You may connect present studies with investigations described in published articles and conducted by famous researchers in past. You show your own contributions and accounts. An abstract format may be updated many times. Each popular thesis abstract includes writer’s scores greatly described at the beginning of written dissertation work.

An accurate summary shows the author’s analytical and writing skills. It contains key objectives, research justifications, detailed methodology, writing techniques, major results and study statements. Never write thesis abstracts before completing a dissertation. Table of content and paper headings may be used as guidelines to write proper thesis abstract. Letting other people read your thesis abstract before submitting is important; it gives a chance to deal with possible mistakes in minutes. Thesis abstract includes various elements. It casts light on difficult methodology and identifies what is your research problem .

Experienced writers prefer writing a dissertation abstract after the entire paper was written and the results were reached. It allows creating a professional paper’s summary. Proper scientific content is important when readers generally read dissertation’s summaries first. This is a short version of the main paper allowing readers gaining the main information and building their own expectations about dissertation outcomes. This special content needs to be flawless and original.

Thesis abstract is an essential part of every dissertation paper. It is a professional summary of a complete dissertation work presented on a few pages at the beginning of the dissertation paper. It gives readers a chance to discover the key points of the dissertation, its research chapters, calculations, source references, methodology and results part. Writing a proper abstract is essential.

Students use various popular techniques and guidelines to perform perfect thesis abstract, including numerous summaries samples available online. Proper structure of short summary is crucial. It should answer all researches’ questions and be written to identify major elements and objectives of a dissertation. Thesis abstract answers main questions of the entire paper. This short summary is a single page of text. Every thesis abstract needs to show the key methods used in a work, problems analyzed and gathered outcomes of conducted complex research work.

Researcher: [Name Surname] Presentation Title: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Research Focus: Chemistry School: [School Name] Presentation Type: Poster Presentation Abstract: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Deneen Cole, Dr. Fadi Bou-Abdallah, SUNY Potsdam (NY, USA), Dr. Paolo Arosio, University of Brescia (Italy), Dr. Sonia Levi, Vita-Salute San Raffaele University (Italy) Ferritin is a ubiquitous iron storage and detoxification protein found highly conserved in species from bacteria to plants to humans. In mammals, ferritin is composed of two functionally and genetically distinct subunit types, H (heavy, ~21,000 Da) and L (light, ~19,000 Da) subunits which co-assemble in various ratios with tissue specific distribution to form a shell-like protein. The H-subunit is responsible for the fast conversion of Fe(II) to Fe(III) by dioxygen (or H2O2) whereas the L-subunit is thought to contribute to the nucleation of the iron core. In the present work, we investigated the iron oxidation and deposition mechanism in two recombinant heteropolymers ferritin samples of ~20H:4L (termed H/L) and ~22L:2H (termed L/H) ratios. Data indicates that iron oxidation occurs mainly on the H-subunit with a stoichiometry of 2Fe(II):1O2, suggesting formation of H2O2. The H/L sample completely regenerates its ferroxidase activity within a short period of time suggesting rapid movement of Fe(III) from the ferroxidase center to the cavity to form the mineral core, consistent with the role of L-chain in facilitating iron turn-over at the ferroxidase center of the H-subunit. In L/H, Fe(II) oxidation and mineralization appears to occur by two simultaneous pathways at all levels of iron additions: a peroxidation pathway with a 2Fe(II)/1O2 ratio and a mineralization pathway with a 4Fe(II)/1O2 resulting in an average net stoichiometry of ~3Fe(II)/1O2. These results illustrate how recombinant heteropolymer ferritins control iron and oxygen toxicity while providing a safe reservoir for reversible uptake and release of iron for use by the cell.

Researcher: [Name Surname] Presentation Title: An Analysis of Yukon Delta Salmon Management Research Focus: Fisheries management related to Bering Sea fisheries and Yukon River salmon populations. School: [School Name] Student Level: Masters Presentation Type: Oral Presentation Abstract: The broad range of Pacific Alaskan salmon has resulted in the creation of a complex and multiorganizational system of management that includes the state of Alaska, various federal departments, a Congressionally-mandated fishery council, and a number of commercial and nongovernmental fish organizations. In the Bering Sea salmon are caught by the commercial groundfish fleet as by-catch. On the Yukon River salmon are commercially and traditionally harvested for both economic and cultural sustenance by the Yup’ik residents of the Yukon Delta. Declining salmon populations has driven scientific research which considers the effects of Bering Sea salmon by-catch. My research findings indicate that Bering Sea fisheries occur where juvenile salmon mature, directly impacting Yukon River salmon populations. Further, the research reflects that although Yukon salmon populations have plummeted, a recent effort was made to open the northern Bering Sea, which includes the Yukon River coastal shelf, to deep-sea commercial fishing. By researching the relationship of policy to cultural salmon dependence, it becomes evident that Alaskan salmon-tribes are excluded from salmon management and decision-making. Legal research reflects that three basic federal Indian concepts – inherent rights, Indian Country, and tribal right of occupancy – emerge as potential foundations that may allow Alaskan salmon tribes to begin sharing legal responsibility over salmon. Yukon River salmon are an international and anadromous species that require multi organizational management. My research reflects that current management favors the Bering Sea commercial fishing industry, despite data indicating Bering Sea fisheries impact Yukon salmon populations and an overall downward trend in Yukon salmon populations.

The methodology is an important part of your dissertation. It describes a broad philosophical underpinning to your chosen research methods, either quantitative or qualitative, to explain to readers your approach better. Make sure that you’re clear about an academic basis for your choice of research ...

When writing an academic paper on either broad or narrow research paper topics, a good research question can help you start well. It’s all about stating a clear one that your research will answer. It plays an important role because it helps you focus the entire paper and enables you to make a strong...

When you write a thesis, you should pay exceptional attention to the introduction. The reader will start your thesis from the introduction, and he will make up his view and understanding of the problem, your ideas, professionalism and writing skills based on the introduction. Your introduction is an...

How to Write an Abstract

An abstract of a work, usually of an essay, is a concise summary of its main points. It is meant to concentrate the argument of a work, presenting it as clearly as possible.

The abstract often appears after the title and before the main body of an essay. If you are writing an abstract as part of an assignment, you should check with your instructor about where to place it.

Here are a few guidelines to follow when composing an abstract:

In what follows, the authors have written an effective abstract that adheres to the basic principles above:

Literary critics have long imagined that T. S. Eliot’s The Sacred Wood (1920) shaped the canon and methods of countless twentieth-century classrooms. This essay turns instead to the classroom that made The Sacred Wood : the Modern English Literature extension school tutorial that Eliot taught to working-class adults between 1916 and 1919. Contextualizing Eliot’s tutorial within the extension school movement shows how the ethos and practices of the Workers’ Educational Association shaped his teaching. Over the course of three years, Eliot and his students reimagined canonical literature as writing by working poets for working people—a model of literary history that fully informed his canon reformation in The Sacred Wood . This example demonstrates how attention to teaching changes the history of English literary study. It further reveals how all kinds of institutions, not just elite universities, have shaped the discipline’s methods and canons. (Buurma and Heffernan)

This abstract uses the first two sentences to establish the essay’s place in its field of study and to suggest how it intervenes in existing scholarship. The syntax is direct and simple. The third sentence begins to outline how the authors will support their argument. They aim to demonstrate the relevance of Eliot’s teaching to his ideas about literature, and so they move next to discuss some of the details of that teaching. Finally, the abstract concludes by telling us about the consequences of this argument. The conclusion both points to new directions for research and tells us why we should read the essay.

Buurma, Rachel Sagner, and Laura Heffernan. Abstract of “The Classroom in the Canon: T. S. Eliot’s Modern English Literature Extension Course for Working People and The Sacred Wood. ” PMLA , vol. 133, no. 2, Mar. 2018, p. 463.

Estate Best 18 July 2021 AT 05:07 AM

Please how will I write an abstract for my own poem collections?

Your e-mail address will not be published

Marc Simoes 01 April 2022 AT 04:04 PM

I am teaching students how to format and write an abstract, but I find no precise guidelines in the MLA Handbook. Should the first word of the abstract body text begin with the word "Abstract" followed by a period or colon and then the abstract content? Should the word "Abstract" be underlined? Over the years, I was taught both of these ways by different instructors, but I haven't found any definitive instructions, and now my students are asking me the correct format. Please help! Thank you!

Joseph Wallace 12 April 2022 AT 01:04 PM

Although publishers like the MLA will use their own house style guidelines for abstracts in published material, there is no one correct way for students to format their abstracts. Instructors should decide what works best for their classes and assignments.

Join the Conversation

We invite you to comment on this post and exchange ideas with other site visitors. Comments are moderated and subject to terms of service.

If you have a question for the MLA's editors, submit it to Ask the MLA!

IMAGES

Abstract Paper Sample Format : College research papers for sale. Disclaimer: provides
Abstract Paper Sample Format : 002 Research Paper Sample Abstract 393553 How To Write
What Is The Meaning Of Thesis Writing
How To Write An Abstract For A Research Paper Sample
Thesis Abstract
Abstract Paper Sample Format

VIDEO

How to writer Excellent Abstract, Introduction and Conclusion of your Report
Postgraduate funding for Research NRF proposals 2022
34 Capstone Project Thesis Titles Compilation and Ideas
Download and Install writefull for word| Writefull for abstract and title create
Пойми живой язык природы, и скажешь ты: прекрасен мир!
Meeting My Team To Write Thesis

COMMENTS

How to Write an Abstract | Steps & Examples - Scribbr
Tips for writing an abstract. Read other abstracts. The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already ... Reverse outline. Write clearly and concisely. Check your formatting.
Writing an Abstract for Your Research Paper
An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes: an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
How To Write A Dissertation Abstract (With Examples) - Grad Coach
How to write your abstract. As we touched on earlier, your abstract should cover four important aspects of your research: the purpose, methodology, findings, and implications. Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.
The Writing Center | Writing an Abstract | Writing In...
An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper. According to Carole Slade, an abstract is ...
How to Write an Abstract for a Dissertation or Thesis
The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract.
How to Write a Perfect Thesis Abstract – ProThesisWriter.com
Thesis abstract is a small version of your dissertation or thesis. This small description ensures a better understanding of an entire paper, discovers the present condition of analyzed problems, distinguishes main objectives and determines existing expectations. A profound analysis of a major question is requested.
How To Write an Abstract in 7 Steps (With an Example)
Here are the basic steps to follow when writing an abstract: 1. Write your paper. Since the abstract is a summary of a research paper, the first step is to write your paper. Even if you know what you will be ... 2. Review the requirements. 3. Consider your audience and publication. 4. Explain the ...
How to Write an Abstract | MLA Style Center
An abstract of a work, usually of an essay, is a concise summary of its main points. It is meant to concentrate the argument of a work, presenting it as clearly as possible. The abstract often appears after the title and before the main body of an essay.